SHA鍨嬪彲瑾�(di脿o)闃诲凹褰堢哀娓涢渿鍣ㄥ畨瑁濊(shu艒)鏄�
SHA鍨嬪彲瑾�(di脿o)闃诲凹褰堢哀娓涢渿鍣ㄥ畨瑁濊(shu艒)鏄�
SHA?spring isolator installation guide
瀹夎鍓�锛岃珛(q菒ng)纰鸿獚(r猫n)娣炴睙闆嗗湗(tu谩n)褰堢哀娓涢渿鍣ㄧ殑鍨嬭櫉(h脿o)鍜岃(gu墨)鏍兼槸鍚︽纰�銆�
Before installation,make sure the model and the specification are correct.
瀹夎瑾�(shu艒)鏄�
Installation guide
鎵€闇€宸ュ叿锛氬叕鍒跺彛寰�17mm锛圡10锛�銆�19mm锛圡12锛夐枊(k膩i)鍙f壋鎵�銆佺埅寮忓崈鏂�.銆�
Required tools锛�17mm锛圡10锛夈€�19mm锛圡12锛塷pen wrenches and claw jack.
鍙厛鏀剧疆鑸囧綀绨ф笡闇囧櫒楂樺害鐩稿悓鐨勮嚚鏅�(sh铆)鏈ㄥ鑸囪ō(sh猫)鍌欏畨瑁濊檿锛屽啀瀹夎瑷�(sh猫)鍌�銆傦紙濡傚湒1锛�
Place the wooden panel with the same height as the isolator at the installation before installing.(Fig 1)
鍏堝皣鍥哄畾铻烘爴鐨勪笂閮ㄨ灪甯藉彇涓嬶紝鍐嶆斁鏉句笅閮ㄧ殑铻烘瘝浣垮叏鐗欒灪鏍撲笅闄�锛屼互鏂逛究灏囧綀绨ф笡闇囧櫒鏀惧叆瀹夎浣嶇疆銆傦紙濡傚湒2锛�
Rrmove the upper nuts from the fixed bolt.Loosen the lower nuts to descend the full-thread bolt to install the isolator.(Fig 2)
鏍规摎(j霉)铻烘爴鍥哄畾瀛旂殑浣嶇疆锛岃垏瀹夎浣嶇疆闋�(y霉)鍩嬪熀绀�(ch菙)铻烘爴銆�
Embed foundation bolt according to the location of bolt-loaded holes.
灏囧綀绨ф笡闇囧櫒鏀剧疆鍒拌垏瑷�(sh猫)鍌欑殑姝g⒑瀹夎浣嶇疆銆傦紙濡傚湒3锛�
Place the isolator on the correct installation location.(Fig 3)
SHA鍨嬪綀绨ф笡闇囧櫒绲�(ji茅)妲�(g貌u)鍦栵細
SHA Spring shock absorber Structure drawing
鍨嬭櫉(h脿o)/瑕�(gu墨)鏍� | L (mm) |
L1 (mm) |
L2 (mm) |
L3 (mm) |
H (mm) |
D (mm) |
M (mm) |
SHA-S | 153 | 123 | 105 | 71 | 120 | 12 | 12 |
SHA-M | 178 | 135 | 117 | 76 | 135 | 12 | 14 |
SHA-L | 209 | 175 | 1152 | 88 | 160 | 16 | 16 |
瑾�(di脿o)鏁翠笅閮ㄨ灪姣嶄娇鍏ㄧ墮铻烘爴涓婂崌鑷宠垏瑷�(sh猫)鍌欏畨瑁濊檿锛屽苟灏囦笂閮ㄨ灪姣嶈垏鍏ㄧ墮铻烘爴閹栫穵銆傦紙濡傚湒4锛�
Adjust lower nuts to raise the full-thread bolt for the installation and slightly lock the upper nuts and full-thread bolt.(Fig 4)
浣跨敤闁�(k膩i)鍙f壋鎵嬩互闋嗘檪(sh铆)閲�?l猫)杈冭洏{(di脿o)鏁磋灪姣嶄娇褰堢哀鍙楀姏涓嬪锛岃(di脿o)鏁磋嚦鑷ㄦ檪(sh铆)鏈ㄨ嚭(t谩i)鍙彇鍑烘檪(sh铆)鍋滄瑾�(di脿o)鏁淬€傦紙濡傚湒5锛�
Apply open wrench in the clockwise direction to press down the spring. Adjustment can be stopped and wooden panel can be removed once you can take out thepressure pad.(Fig 5)
灏囧浐瀹氳灪鏍撶⒑淇濆畬鍏ㄩ帠绶�锛屽嵆瀹屾垚娣炴睙闆嗗湗(tu谩n)褰堢哀娓涢渿鍣ㄥ畨瑁濊(di脿o)鏁淬€傦紙濡傚湒6锛�
After the adjustment,lock the isolator with fixed bolt.(Fig 6)
瀹夎鍚庤珛(q菒ng)妾㈡煡褰堢哀涓嬪閲�锛屽褰堢哀澹撳埌搴�锛屽墖琛ㄧず鑽烽噸涓嶈冻锛屾矑(m茅i)鏈夋笡闇囨晥鏋�銆傛噳(y墨ng)瑭叉洿鎻涜純澶ц嵎閲嶇殑褰堢哀娓涢渿鍣ㄥ瀷铏�(h脿o)锛屽苟璜�(q菒ng)浜庢湰鍏徃妤�(y猫)鍕�(w霉)浜哄摗鑱�(li谩n)绯�銆�
After the adjustment,check the press amount of the spring.If it appears with insufficient loading,please replace with bigger loading by contacting our staff.
瀹夎鏅�(sh铆) 璜�(q菒ng)娉ㄦ剰瀹夊叏銆�
Be cautious during the installation.
淇濋(y菐ng)闋堢煡锛氭瘡鏈堣瑙€瀵烠S鍥哄畾铻烘爴鏄惁鏈夋澗鍕�(d貌ng)锛屼繚鎸佸綀绨ф笡闇囧櫒瀹夎鏅�(sh铆)褰堢哀涓嬪鎾撳害鏄惁姝e父銆�
Maintenance checking points:remain M12 fixed bolt locked,balance of the base,installation of the isolator,and the deflection of the spring.
鍦�1锛夊畨瑁濊ō(sh猫)鍌欐檪(sh铆)鍏堟斁缃垏褰堢哀娓涢渿鍣ㄩ珮搴︾浉鍚岀殑鏈ㄨ嚭(t谩i)銆�
Fig 1锛塒ace the wooden panel with the same height as the isolator at the installation before installing.
鍦�2锛夊浐瀹氳灪鏍撶殑涓婇儴铻哄附鍏堝彇涓嬩締(l谩i)锛屽啀鎶婁笅閮ㄨ灪甯芥澗鎺変娇铻烘爴涓嬮檷锛屼互渚垮畨瑁�銆�
Fig 2锛塕emove the upper nuts from the fixed bolt.Loosen the lower nuts to descend the bolt for the installation.
鍦�3锛夊皣娣炴睙闆嗗湗(tu谩n)褰堢哀娓涢渿鍣ㄦ斁鍏ヨō(sh猫)鍌欑殑瀹夎搴曢儴浣嶇疆銆�
Fig 3锛塒lace the isolator on the correct installation location.
鍦�4锛夎(di脿o)鏁翠笅閮ㄨ灪甯戒娇铻烘爴涓婂崌鑷宠兘鑸囪ō(sh猫)鍌欓€f帴锛屽啀灏囧浐瀹氳灪甯介帠绶�銆�
Fig 4锛堿djust lower nuts to raise the bolt to connect with the equipment and slightly lock the fixed nuts.
鍦�5锛夌敤闁�(k膩i)鍙f壋鎵嬩互闋嗘檪(sh铆)閲�?l猫)杈冭洏{(di脿o)鏁磋灪甯�锛岃(di脿o)鏁�*鑷ㄦ檪(sh铆)鏈ㄨ嚭(t谩i)鍙互鍙栧嚭鏅�(sh铆)鍗冲彲鍋滄瑾�(di脿o)鏁�銆�
Fig 5锛堿pply open wrench in the clockwise direction to adjust the nuts.Adjustment can be stopped once wooden panel is removed.
鍦�6锛夊皣鍥哄畾铻烘爴鑸囪ō(sh猫)鍌欏畬鍏ㄩ帠绶婂悗锛屽嵆瀹屾垚娣炴睙闆嗗湗(tu谩n)褰堢哀娓涢渿鍣ㄥ畨瑁濊(di脿o)鏁淬€�
Fig 6锛堿fter the adjustment锛宭ock the isolator with fixed bolt.